Saturday, 12 January 2019

Tissue NanoTransfection (TNT)


            Nanochip technology
Researcher developed a new technology, Tissue Nanotransfection (TNT) that can generate any types of cell within the patient’s own body. This technology can be used to repair damaged tissues including blood vessels, nerve cells.
   


By using the Nanochip technology injured tissue or organs can be replaced. It is observe that skin is like a fertile soil where we can grow any organ that is declining.
Researchers have performed an experiments on pig and mice which was successful. By engaging lots of time their work is successful, which is difficult to imagine but it is achievable. This technology helps to convert the skin cells into elements of any organ. One of the interesting part is that with just one touch, less than a second and is non-invasive.

Saturday, 1 September 2018

Third of early deaths could be prevented by everyone giving up meat, Harvard says

The benefits of a vegetarian diet have been vastly underestimated, experts concludedAt least one-third of early deaths could be prevented if everyone moved to a vegetarian diet, Harvard scientists have calculated.
Dr Walter Willett, professor of epidemiology and nutrition at Harvard Medical School said the benefits of a plant-based diet  had been vastly underestimated.
Recent figures from the Office for National Statistics suggested that around 24 per cent or 141,000 deaths each year in Britain were preventable,  but most of that was due to smoking, alcohol or obesity.
But the new figures from Harvard suggest that at least 200,000 lives could be saved each year if people cut meat from their diets. 
Speaking at the Unite to Cure Fourth International Vatican Conference in Vatican City, Dr Willett, professor of epidemiology and nutrition at Harvard Medical School said: “We have just been doing some calculations looking at the question of how much could we reduce mortality shifting towards a healthy, more plant based diet, not necessarily totally vegan, and our estimates are about one third of deaths could be prevented.
“That’s not even talking about physical activity or not smoking, and that’s all deaths, not just cancer deaths. That’s probably an underestimate as well as that doesn’t take into account the fact that obesity is important and we control for obesity. 

Friday, 6 April 2018

Forging and it's types

Forging and its types
Forging is the operation where the metal is heated and then a force is applied to manipulates the metals in such a way that the required final shape is obtained. Forging is generally a hot working process through cold forging is used sometimes.
Type of forging
1.     smith forging
2.     drop forging
3.     press forging
4.     machine forging
1: Smith forging
This is the traditional forging operation done openly or in-openly dies by the village black smith or modern shop floor by manual hammering or by the power hammer. The process involves heating the stock in the black smith hearth and then beating it over the anvil. To get the desire shape the operator has to manipulate the component in between the blows.The types of operation available are fullering, flattering, bending , upsetting and swaging.
 2: Drop forging
Basic definition:
This is the operation done in closed impression dies by means drop hammer here the force for shaping the component is applied in a series of blows.
      
Drop forging utilizes a closed impression die to obtain the desire shape of the component , the shaping is done by the repeated hammering given to the material in the die cavity. The equipment use for delivering for blows are called drop hammers. The drop forging die consists of two halves. The lower halve of the die is fixed to the anvil of the machine , while the upper halve is fixed to ram. The heated stock is kept in the lower die, while the ram delivers 4-5 blows on the metal spreads and completely fills in the die cavity. When the two die of halves closed the complete is formed. The typical products obtained in drop forging are cranks, crank shaft, connecting rods, wrench, crane hooks etc. The types of operations are fullering, edging, bending, blocking , finishing and trimming etc.
3: Press forging
Similar to the drop forging , the press forging is also done in closed impression dies with the expectation that the force is continuous squeezing type applied by the hydraulic press. Press forging dies are similar to drop forging dies as also the process in press forging, the metal is shaped not by means of  a series of blows as in drop forging , but by means of a single continuous squeezing action. This squeezing is obtained by means of hydraulic presses. Because of the continuous action of by hydraulic presses, the material gets uniformly deform through out its entire depth ,the press forging dies with the various impression , such as fuller, bender and finisher impression properly arranged .
4: Machine forging:
Unlike the press or drop forging where the material is drawn out , in machine forging the material is only upset to get the desire shape. As it involves the upsetting operation some time it is simply called as upset forging. Originally this was develop for making bolts head in a continuous fashion, but now there are fairly large number of diverse.
Uses of this process:
Because of the beneficial grain flow obtain from upsetting. It is used for making gears, blanks, shafts, excels, and similar parts. Upsetting machine called up setter are generally horizontal acting. The die set consists of die and corresponding punch or a heading tool. The die consists of two parts, one called the stationary gripper die which is fixed to the machine frame and the other movable gripper die which moves along with the die slide of the up setter. The stock is held then between these two gripper dies.
The upset forging cycle start with the, movable die sliding against the stationary die to grip the stock. The two dies when in closed position from the necessary die cavity then the heading tool advance against the stock and upset it to completely filled to the die cavity.
Having completed the upsetting the heading tool moves back to its back position. Then the movable gripper die releases the stock by sliding backward. Similar to drop forging it is not possible to get the final shape in a single pass in machine forging also. Therefore the operation is carried out in number of stages. The die cavities is required for the various operations are all arrange vertically on the gripper dies. The stock is the move from stage one to another in proper sequence till the final forging is ready. A heading tool each for every upsetting stage is arranged on the heading slide of the upsetting machine. 
Forging defects:
Though forging process give generally prior quality product compared other manufacturing processes. There are some defects that are lightly to come a proper care is not taken in forging process design.
A brief description of such defects and their remedial method is given below.
A: Unfilled Section:
In this some section of the die cavity are not completely filled by the flowing metal. The causes of this defects are improper design of the forging die or using forging techniques.
B: Cold Shut:
This appears as a small cracks at the corners of the forging. This is caused manely by the improper design of die. Where in the corner and the fillet radie are small as a result of which metal does not flow properly into the corner and the ends up as a cold shut.
C: Scale Pits:
This is seen as irregular depurations on the surface of the forging. This is primarily caused because of improper cleaning of the stock used for forging. The oxide and scale gets embedded into the finish forging surface. When the forging is cleaned by pickling, these are seen as depurations on the forging surface.
D: Die Shift:
This is caused by the miss alignment of the die halve, making the two halve of the forging to be improper shape.
E: Flakes:
These are basically internal ruptures caused by the improper cooling of the large forging. Rapid cooling causes the exterior to cool quickly causing internal fractures. This can be remedied by following proper cooling practices.
F: Improper Grain Flow:
This is caused by the improper design of the die, which makes the flow of the metal not flowing the final interred direction.

Monday, 26 March 2018

TIG- Tungsten Inert Gas welding


                                   Principle of TIG                                 
TIG welding works on same principle of arc welding. In a TIG welding process, a high intense arc is produced between tungsten electrode and work piece. In this welding mostly work piece is connected to the positive terminal and electrode is connected to negative terminal. This arc produces heat energy which is further used to join metal plate by fusion welding. A shielding gas is also used which protect the weld surface from oxidization.
                         
                                     WORKING OF TIG

  • First, a low voltage high current supply supplied by the power source to the welding electrode or tungsten electrode. Mostly, the
    electrode is connected to the negative terminal of power source and work piece to positive terminal.
  • This current supplied form a spark between tungsten electrode and work piece. Tungsten is a non –consumable electrode, which give a highly intense arc. This arc produced heat which melts the base metals to form welding joint.
  • The shielded gases like argon, helium is supplied through pressure valve and regulating valve to the welding torch. These gases form a shield which does not allow any oxygen and other reactive gases into the weld zone. These gases also create plasma which increases heat capacity of electric arc thus increases welding ability.
  • For welding thin material no filler metal is required but for making thick joint some filler material used in form of rods which fed manually by the welder into welding zone


Advantages:

  • TIG provides stronger joint compare to shield arc welding.
  • The joint is more corrosion resistant and ductile.
  • Wide verity of joint design can form.
  • It doesn’t required flux.
  • It can be easily automated.
  • This welding is well suited for thin sheets.
  • It provides good surface finish because negligible metal splatter or weld sparks that damage the surface.
  • Flawless joint can be created due to non-consumable electrode.
  • More control on welding parameter compare to other welding.
  • Both AC and DC current can be used as power supply.

Disadvantages:

  • Metal thickness to be weld is limited about 5 mm.
  • It required high skill labor.
  • Initial or setup cost is high compare to arc welding.
  • It is a slow welding process.

Application:

  • Mostly used to weld aluminum and aluminum alloys.
  • It is used to weld stainless steel, carbon base alloy, copper base alloy, nickel base alloy etc.
  • It is used to welding dissimilar metals.
  • It is mostly used in aerospace industries.

Characteristics of welding process

WELDS can be characterized according to a number of criteria, including the welding process used, size, shape, mechanical properties, chemical composition, and a number of others. The appropriate methods of characterization depend on the weld's function and the particular set of properties required for the application. In some instances, the ability of a weld to function successfully can be addressed by characterizing the size or shape of the weld. An example of this is where factors related to the welding procedure, such as inadequate weld size, convexity of the bead, or lack of penetration, may cause a weld to fail. In other cases, it is important to characterize metallurgical factors such as weld metal composition and microstructure. Examples might include welds for which the goal is to avoid failures due to inadequate strength, ductility, toughness, or corrosion resistance. In general, the goals of weld characterization are to assess the ability of a weld to successfully perform its function, to thoroughly document a weld and welding procedure that have been demonstrated to be adequate, or to determine why a weld failed. In the first part of this article, characterization of welds will be treated as a sequence of procedures, each more involved than the last and concerned with a finer scale of detail. Initially, non-destructive characterization procedures will be the focus. The first level of characterization involves information that may be obtained by direct visual inspection and measurement of the weld. A discussion of nondestructive evaluation follows. This encompasses techniques used to characterize the locations and structure of internal and surface defects, including radiography, ultrasonic testing, and liquid penetrant inspection. The next group of characterization procedures discussed are destructive, requiring the removal of specimens from the weld. The first of these is macrostructural characterization of a sectioned weld, including features such as number of passes; weld bead size, shape, and homogeneity; and the orientation of beads in a multipass weld. Macroscopic characterization is followed by microstructural analysis, including microsegregation, grain size and structure, the phase makeup of the weld, and compositional analysis. The third component of weld characterization is the measurement of mechanical and corrosion properties. The goal of any weld is to create a structure that can meet all the demands of its service environment. In many cases, the best way of assessing the performance of a weld is to establish its mechanical properties. In addition to a number of standard material tests, many mechanical tests are directed specifically at determining a weld's capabilities. Examples of mechanical properties typically characterized for welds include yield and tensile strength, ductility, hardness, and impact or fracture toughness. Corrosion testing is often employed in situations where a welding operation is performed on a corrosion-resistant material, or in a structure exposed to a hostile environment. Although absolute corrosion performance is important, a major concern is to ensure that a weld and its heat-affected zone (HAZ) are cathodic to the surrounding metal. Following the discussion of the characterization procedures, the second part of this article will give examples of how two particular welds were characterized according to these procedures.

Advantages , disadvantages and application of Gas welding

A good flux should have following desirable properties:
1. It should have low melting temperature than the base metal.
2. It should easily and readily react with metallic oxides and form a low melting temperature fusible slag to float on the top of the weld.
3. It should be easily chipped-off after solidification.
4. It should also act as better cleaning agent.
5. It should not adversely affect the base metal.
6. It should not chemically react with the base metal.
7. It must not cause corrosion on the finished weld.

Applications of Gas Welding:

Oxy-acetylene gas welding is widely used in practical field.
Some important applications are:
1. For joining most ferrous and non-ferrous metals, carbon steels, alloy steels, cast iron, aluminum and its alloys, nickel, magnesium, copper and its alloys, etc.
2. For joining thin metals.
3. For joining metals in automotive and aircraft industries.
4. For joining metals in sheet metal fabricating plants.
5. For joining materials those requires relatively slow rate of heating and cooling, etc.

Advantages of Gas Welding:

The following are the advantages of gas welding:
1. Portable and Most Versatile Process:Gas welding is probably portable and most versatile process. The ranges of gas welding products are very wide. It can be applied to variety of manufacturing, maintenance and repair work.
2. Better Control over the Temperature:Gas welding provides better control over the temperature of the metal in the weld zone by controlling the gas flame.
3. Better Control over Filler-Metal Deposition Rate:In gas welding, the source of heat and filler metal are separate unlike arc welding. This provides better control over filler-metal deposition rate.
4. Suitable to Weld Dissimilar Metals:The gas welding can be suitable to weld the dissimilar metals with suitable filler and flux material.
5. Low Cost and Maintenance:The cost and maintenance of the gas welding equipment’s is low as compared to some other welding processes. The equipment is versatile, self-sufficient and portable.

Disadvantages of Gas Welding:

1. Not Suitable for Heavy Sections:Since the heat produced is not sufficient and hence heavy sections cannot be joined economically.
2. Less Working Temperature of Gas Flame:The flame temperature is less than the temperature of the arc.
3. Slow Rate of Heating:The rate of heating and cooling is relatively slow. In some cases this is advantageous.
4. Not Suitable for Refractory and Reactive Metals:Refractory metals like tungsten, molybdenum and reactive metals like titanium and zirconium cannot be welded by gas welding process.
5. Larger Heat affected Area:Gas welding results in a larger heat affected area due to prolonged heating of joint.
6. Flux Shielding is not so Effective:Flux-shielding in gas welding is not as effective as in case of TIG or MIG welding. The oxidation cannot be avoided completely.
7. Problem in Storage and Handling of Gases:More safety problems are associated with the storage and handling of explosive gases e.g., acetylene and oxygen.

Wednesday, 14 March 2018

Functions of Flux coating in Electrode

1. Improve the electric conductivity in the arc region to improve the arc ignition and stabilization of the arc.
2. Formation of slag, which;
(a) Influences size of droplet.
(b) Protects the droplet during transfer and molten weld pool from atmospheric gases.
(c) Protects solidified hot metal from atmospheric gases.
(d) Reduces the cooling rate of weld seam.
3. Formation of shielding gas to protect molten metal  (The coating give off inert gases as CO2 under arc heat,            which shields the molten metal pool and protects it from the atmosphere oxygen,Hydrogen and Nitrogen pick-          up,thus reducing contamination of the weld.)
4. Provide deoxidizers like Si and Mn in form of FeSi and FeMn.
5. Alloying with certain elements such as Cr, Ni, Mo to improve weld metal properties.
6. Improve deposition rate with addition of iron powder in coating since the thermal losses to the atmosphere             from the electro tip are reduced.
    One of the major concerns with the coated electrodes is the moisture pick-up by the coating. This moisture, when it enters the puddle, dissociates into oxygen and hydrogen with the hydrogen being absorbed by the liquid metal and subsequently relesed during solidification, causing porosity. Normally, some additives are added to the coating to reduce the moisture pick-up from the damp atmosphere. But they do not ensure complete safety from the moisture pick-up. The electrodes should be picked out of the oven only when welding is to be done. They should not be out of the oven for more than 30 min to 4 hours depending upon the moisture picking time of a particular coating

Pashupatinath:A Epitome of spirituality and cultural heritage

 Pashupatinath: An Epitome of Spirituality and Cultural Heritage Pashupatinath, a venerated temple in Kathmandu, Nepal, stands as a sacred s...