Friday, 16 February 2018

Core-Making Process

Core making is an important branch in any foundry and the choice of core making depends on various factors. To name them are depending on type of metal to be cast, depending on the size of casting, choice based on complexity involved in a casting process, depending on the requirement of quality in final product, depends on equipment used for production and energy source.There are six most common technologies involved in core making. They are
  • Oil as the sand binder
  • Green sand
  • Hotbox
  • Coldbox
  • Nobakes
  • Shell process
In each of the above technologies there are various advantages and drawbacks.
Requirements and Features of Common Technologies in Core Making :
When each of the above technology is ranked based on the usage of energy per unit of product ranking from greatest to lowest amount the order is oil as the sand binder being the highest followed by green sand, hotbox, coldbox, nobakes and shell process being lowest usage of energy in ranking.
That is when rated in percentage the technology of oil as the sand binder uses the maximum energy of hundred percentage and green sand used 85% followed by hotbox with 75%, coldbox with 58%, nobakes with 38%. The least energy usage is made by shell process technology with 35% recorded as usage.
The oil as the sand binder as well as the green sand technology uses high energy because it needs high temperatures for the process of curing and refractory coating and pasting has to be carried out on cores. The hotbox technology gives output as solid cores and needs hot curing for the process of binder setting. The technology of coldbox is carried out with the usage of heated sand and amine gas mixture.
Nobakes technology operates at accurately controlled setting. The least usage of energy is by shell process technology in which no coating is necessary.

Process change to any foundry must be taken only after careful projection on various factors being taken into account. Some to name in this direction are processing change results on costs like fixed and variable, investment or capital cost, payback needed and so on. In a similar way per actions towards energy consumption must be made for achieving system efficiency, which must also focus on step towards consistent usage of such energy consumed to be used efficiently.
Some of the steps suggested for workforce in this aspect are avoiding wastages of shell sand, usage of equipments producing heat only when needed, analyzing and taking steps towards vital defects, making economical usage by switching of unwanted machineries.
Some of the process improvements that could be made at reduced cost towards this direction are taking steps for oven insulation, going for moisture sensors installation, taking steps towards process improvements like reviewing for reusable products like steel cores which increase productivity and helps in achieving greater quality with cost cutting.
The high cost up gradations that could be taken in the direction for system efficiency are going for improvements in drying process by making use of either infrared heating or microwave heating, making use of technique of continuous drying, reuse of heat recovered, taking steps towards heat recovery like recovery of heat from exhausts attached in the drying or baking oven.

Tuesday, 13 February 2018

DETAILED DISCUSSION ON GATING SYSTEM

A system that leads molten metal to flow through a ladle to mold cavity consisting of pouring basin, Sprue, Sprue base, runner, runner extension, in-gates, riser called as gating system.
The design consideration of gates are given below:
1) The mold cavity should be completely filled within a smaller time without having to rise the metal temperature as huge higher metal head.
2) The molten metal should flow smoothly into the mold without any turbulence.
3) Unwanted materials such as slag and other mold materials should not be allow to enter the mold cavity.
4) The metal velocity should be controllable so as to avoid any aspiration of air ,erosion of mold cavity.
5) Should promote directional solidification.
6) Casting yield should be maximized.
The different elements of gating system are discussed below:
1) Pouring basin/cup
2) Sprue
3) Sprue base
4) Runner
5) Runner extension
6)In gates
     POURING BASIN/CUP:: It is the first step where the molten metal is poured and act like reservoir from which it moves smoothly into the Sprue. The molten metal is not directly poured in Sprue because it may erode the wall of sprue and it also does not allow to enter the slag into mold cavity. The pouring basin should be full otherwise atmospheric air and slag may enter the mold cavity. The main function of a pouring basin is to reduce the momentum of the liquid flowing into the mold cavity.
   SPRUE:: Sprue is the channel through which the molten metal is brought into the parting plane where it enters the runners and gates to ultimately reach the mould cavity. The molten metal when moving from top of the cope to the paring plane gains velocity and as a consequences  requires a smaller area of cross section for the same amount of metal to flow at the top. To eliminate this problem of air aspiration, the sprue is tapered to gradually reduce the cross section as it moves away from top of the cope.
SPRUE BASE WELL:: This is the reservoir for the metal at the bottom of the sprue to reduce the momentum of the molten metal. The molten metals it moves down the sprue gains in velocity, some of which is lost in the sprue base well by which the mold erosion is reduced
 RUNNER::  It is generally located in the horizontal plane , which connects the sprue to its in-gates , thus allowing the metal enter the moud cavity.The runners are normally made trapezoidal in cross section. It is a general practice for ferrous metals to cut the runners in the cope and the in-gates in the drag. The main reason for this is to trap the slag and dross,which are lighter and thus trapped in the upper portion of the runners.
  RUNNER EXTENSION:: The runner is extended a little further after it encounters the in-gate. The extension is provided to trap the slag in the molten metal. The metal initially comes along with the slag floating at the top of the ladle and flows straight, going beyond the in-gate and then is trapped in the runner extension.
 GATES::  These are the opening through which the molten metal enters the mold cavity. The shape and the cross section of the in-gate should be such that it can readily be broken off after casting solidification and also that it allows the metal to enter quietly into the mold cavity. 


Monday, 1 January 2018

Steps Involved In Sand Casting

Metal casting is the process in which molten metal is poured into a mold and allowed to solidify into an object. The object that solidifies is called a casting. Sand casting is defined as pouring of molten metal into a sand mold and allowing it to solidify in the mold. Sand casting is the most widely used metal casting process in manufacturing and almost all casting metals can be sand cast. A few examples of modern items manufactured by the sand casting processes are gears, dies used in the packing industry, cylinder heads, pump housings, and valves. The sand casting process contains six basic steps
While proper equipment and experience is required to produce a casting free of defects, the sand casting process itself is actually quite simple:

1. CREATE A MOLD

The first step is to create the mold for the casting. A sand mold is formed by packing sand into each half of the mold . The sand is packed around the pattern, which is a replica of the external shape of the casting. When the pattern is removed, the cavity that will form the casting remains. The top and bottom halves of the mold are known as the “cope” and “drag”, respectively.

2. PREPARE AND CLAMP THE MOLD


Once the mold has been made, it must be prepared for the molten metal to be poured. The surface of the mold cavity is first lubricated to help with the removal of the casting (the type of lubricant will depend on the type of sand and metal used), then the mold halves are closed and securely clamped together. It is essential the mold halves remain securely closed to prevent the loss of any material. In this photo, “jackets” are used to secure the two halves together.

3. POUR MOLTEN METAL INTO MOLD

Molten metal is poured into the mold through a gating system, or gap leading from the casting cavity to the outside of the mold. You can see weights and “jackets” on these molds to secure the two halves together. Molten aluminum is being poured into this mold.

4. ALLOW METAL TO COOL

The molten metal that is poured into the mold will begin to cool and solidify once it enters the cavity. When the entire cavity is filled and completes the metal solidification process, the final shape of the casting is formed. The mold can’t be opened until the proper cooling time has elapsed.

5. REMOVE HARDENED CASTING FROM MOLD

After the solidification time has passed, the sand mold can simply be broken, and the casting removed. This step is typically performed by a vibrating machine that shakes the sand and casting out of the flask. The sand is reconditioned for reuse. Once removed, the casting will likely have some sand and oxide layers stuck to the surface. Shot blasting is sometimes used to remove the remaining sand.

6. TRIM EXCESS METAL FROM FINAL CASTING

During cooling, the material from the channels in the mold solidifies and attaches itself to the casting. This excess material must be trimmed from the casting either manually or using a trimming press. The time required to trim the excess material depends on the size of the casting. A larger casting will require a longer trimming time. The scrap material that results from the trimming is either discarded or reused in the sand casting process.

7. POLISH & FINISH FINAL PRODUCT

Depending on the intended use of the final product, the casting may be polished or finished to provide a functional surface for its final application. Surface finishes of varying grades can be applied to remove the roughness left on the surface of the casting. Patriot can provide raw castings or castings ready for use like the one shown in the above photo which has been heat treated and machined. Secondary operations such as powder coating and finishing can also be added.
Facebook

Sunday, 24 December 2017

Fluid Mechanics Questions and Answers – Fluid Properties – 1


This set of Fluid Mechanics Multiple Choice Questions & Answers (MCQs) focuses on “Fluid Properties – 1”.


1. Which one of the following is the unit of mass density?
a) kg = m3
b) kg = m2
c) kg = m
d) kg = ms
Answer: a
Explanation: Mass Density(p) is defined as the mass(m) per unit volume(V ), i.e., p = m ⁄v
Thus, the unit of p is kg = m3.
2. The specific gravity of a liquid has
a) the same unit as that of mass density
b) the same unit as that of weight density
c) the same unit as that of specific volume
d) no unit
Answer: d
Explanation: The specific gravity of a liquid is the ratio of two similar quantities (densities) which makes it unitless.
3. The specific volume of a liquid is the reciprocal of
a) weight density
b) mass density
c) specific weight
d) specific volume
Answer: b
Explanation: Specific volume(v) is defined as the volume(V ) per unit mass(m).
v = v⁄m = 1 / m⁄v = 1⁄p
where p is the mass density.
4. Which one of the following is the unit of specific weight?
a) N = m3
b) N = m2
c) N = m
d) N = ms
Answer: a
Explanation: Specific weight(γ) is defined as the weight(w) per unit volume(V ), i.e.,
γ = w / v
Thus, unit of is N = m3.
5. Which one of the following is the dimension of mass density?
a) [M1 L-3 T0].
b) [M1 L3 T0].
c) [M0 L-3 T0].
d) [M0 L3 T0]
Answer: a
Explanation: Mass Density(p) is defined as the mass(m) per unit volume(V ), i.e.,
[p] = [m]/[v] = [m] /[L3] = [ML-3].
6. Which one of the following is the dimension of specific gravity of a liquid?
a) [M1 L-3 T0].
b) [M1 L0 T0].
c) [M0 L-3 T0].
d) [M0 L0 T0].
Answer: d
Explanation: The specific gravity of a liquid is the ratio of two similar quantities (densities) which makes it dimensionless.
7. Which one of the following is the dimension of specific volume of a liquid?
a) [M1 L-3 T0].
b) [M-1 L3 T0].
c) [M-1 L-3 T0].
d) [M0 L3 T0].
Answer: b
Explanation: Specific volume(v) is defined as the volume(V ) per unit mass(m). Thus,
[v] = [V]/[m] = [L3]/[M] = [M-1L3].
8. Which one of the following is the dimension of specific weight of a liquid?
a) [ML-3 T -2].
b) [ML3 T-2].
c) [ML-2 T-2].
d) [ML2 T-2].
Answer: c
Explanation: Specific weight(γ) is defined as the weight(w) per unit volume(V ), i.e.,
fluid-mechanics-questions-answers-fluid-properties-q8
9. Two fluids 1 and 2 have mass densities of p1 and p2 respectively. If p1 > p2, which one of the following expressions will represent the relation between their specific volumes v1 and v2?
a) v1 > v2
b) v1 < v2
c) v1 = v2
d) Cannot be determined due to insufficient information.
Answer: b
Explanation: Specific volume(v) is defined as the volume(V ) per unit mass(m).
v = v⁄m = 1 / m⁄v = 1⁄p
where p is the mass density. Thus, if p1 > p2, the relation between the specific volumes v1 and v2
will be represented by v1 < v2.
10. A beaker is filled with a liquid up to the mark of one litre and weighed. The weight of the liquid is found to be 6.5 N. The specific weight of the liquid will be
a) 6:5 kN = m3
b) 6:6 kN = m3
c) 6:7 kN = m3
d) 6:8 kN = m3
Answer: a
Explanation: Specific weight(γ) is defined as the weight(w) per unit volume(V ), i.e.,
γ = w⁄V
Thus, γ = 6:5 ⁄10-3 N ⁄ m3 = 6:5 kN/m3.
11. A beaker is filled with a liquid up to the mark of one litre and weighed. The weight of the liquid is found to be 6.5 N. The specific gravity of the liquid will be
a) 0.65
b) 0.66
c) 0.67
d) 0.68
Answer: b
Explanation: Specific gravity(S) of a liquid is defined as the ratio of the density of the liquid(pl) to that of water(pw).
fluid-mechanics-questions-answers-fluid-properties-q11
Thus, S = 0:66.
12. A beaker is filled with a liquid up to the mark of one litre and weighed. The weight of the liquid is found to be 6.5 N. The specific volume of the liquid will be
a) 1 l =kg
b) 1:5 l =kg
c) 2 l =kg
d) 2:5 l =kg
Answer: b
Explanation: Specific volume(v) is defined as the volume(V ) per unit mass(m). Thus,
fluid-mechanics-questions-answers-fluid-properties-q12

Saturday, 23 December 2017

WHY MECHANICAL ENGINEERING IS BETTER ????

Over the past few decades, mechanical engineering degree has raised its value and demand among aspirants and no decline has yet been seen in reputation and scope of mechanical engineering degree. That is why it is often said to be an ever green field.

Mechanical Engineering is a diverse field of engineering. This diversity allows mechanical engineers to pursue a career in any field of life. So it gives you a wide variety of choice after graduation. There are many students who wish to change their field of work after they graduate. So if you are a mechanical engineer, you will find it easy to plunge yourself into a completely new field. Either you want to be a project manager or a technical consultant, being a mechanical engineer you can survive in any field.
    I know many mechanical engineers who are doing awesome jobs as environmentalists because they did masters in environmental engineering after bachelors in mechanical. This is why I said mechanical engineering is diverse in its scope, Even if you don’t like to be a mechanical engineer at work, you can change your path easily. You can pursue higher education in civil engineering, environmental engineering, computer science, software engineering, quality control, project management or even supply chain management. Swapping field of work is not difficult for mechanical engineers.

A Different Kind of Heart Attack: New Research Finds a Broken Heart Permanently Weakens the Organ in a Similar Way

Researchers discover that severe emotional distress can damage the heart physically like a heart attack.
At least 3,000 adults in the U.K. suffer from Takotsubo cardiomyopathy, colloquially termed as the “broken heart syndrome,” each year. It is caused by bereavement and severe emotional distress, which stuns and weakens the heart. This causes the left ventricle – one of the main chambers of the heart – to change shape.
The deformed heart looks similar to an octopus pot, or “takotsubo” in Japanese, which gave the condition its name. Doctors have long presumed that the damage was temporary and would eventually heal over time. ( Broken hearts may actually be able to cause death.)
Interestingly, a major project by Swiss researchers last year found that the condition can also be triggered by extreme happiness as well as sorrow.
Researchers at the University of Aberdeen have discovered that the condition may cause permanent damage to the heart, similar to a heart attack. Following 37 patients with Takotsubo for two years, they found that the heart damage remained long after the event that first triggered the condition. This was seen through regular ultrasound and MRI scans.
Many of the patients reported becoming tired very easily and were thus unable to do much exercise. The researchers suggest that patients should be offered the same drugs as those whose hearts have been damaged by a heart attack.
Lead researcher Dr. Dana Dawson said that Takotsubo is more common than they initially thought, and that it may actually cause permanent damage to the hearts of the patients. Moreover, the condition is affecting the patients’ everyday lives with frequent exhaustion and lack of physical activity.
“Our research shows that Takotsubo needs to be treated with same urgency as any other heart problem, and that patients may need ongoing treatment for these long-term effects,” said Dr. Dawson.
Furthermore, the study suggests that women are more prone to developing this condition than men.
 Treat your heart to some of these healing herbs:
  • 1.Hawthorn (Crataegus spp.) – This helps strengthen the cardiovascular system, lower your cholesterol levels, and maintain a healthy blood pressure. One way to prepare it is to crush its (dried) berries and add a teaspoon of it with some sweetener in a cup of hot water, to sip as tea.
  • 2.Lemon balm (Melissa officinalis) – This herb is most helpful in relieving insomnia and restlessness, that may be caused by intense emotional stress like heartbreak. Add two teaspoons of dried lemon balm, a little bit of sweetener, and lemon juice to a cup of hot water for a flavorful tea.
  • 3.Rose petals (Rosa rugosa) – The rose has long been a symbol of love, whether romantic (red rose) or platonic (yellow rose). Roses can calm the nerves and soothe physical fatigue. A tablespoon of rose petals and some light-flavored honey mixed in hot water is the perfect mood-lifter.

Saturday, 18 November 2017

Have You Ever Visit Davis Falls in Monsoon Season ?

Davi's Falls or Devi's Falls  is a waterfall located at Pokhara n Kaski District, Nepal.


                                      
The water forms an underground tunnel after reaching the bottom. This tunnel is approximately 500 feet (150 m) long and runs 100 feet (30 m) below ground level. On 31 July 1961, a Swiss couple Davi went swimming but the woman drowned in a pit because of the overflow. Her body was recovered 3 days later in river Phusre with great effort. Her father wished to name it "Davi's falls" after her. Its Nepali name is Patale Chango, which means "underworld waterfall".
After exiting the tunnel, the water passes through a cave called Gupteshwor Mahadev or "cave beneath the ground". The Phewa Lake dam is the water source.
It is an attraction for tourists and locals. Thousands of Nepalis visit for recreation and enjoyment. Visitors can try their luck on the luck pond constructed there by throwing and placing the coin on the statue of God. Likewise, one can find a model of traditional typical Nepali house and a series of statue of Nepali people wearing traditional dresses where visitors can click photo. Once it was considered as a suicide point since the locals as well as the tourists jumped from the cliff down to the bottom of the fall. Safety measures were applied soon after increase in such activities by constructing metal fences around the cliff to prevent further suicides.

Pashupatinath:A Epitome of spirituality and cultural heritage

 Pashupatinath: An Epitome of Spirituality and Cultural Heritage Pashupatinath, a venerated temple in Kathmandu, Nepal, stands as a sacred s...